88206 Privacy Cubicle Wall Bracket
Aluminum wall bracket that is used to attach the 88001 Privacy Cubicle Track to the wall in a suspended configuration when the track can't be attached directly to the ceiling. The Wall Bracket is attached to the wall with a single screw (not included). The end of the 88001 Privacy Cubicle Track slips into the bracket, and is attached by tightening the set screws to hold the track securely in place. 1.25 in x 2.75 in x 1.85 in (extension off wall). Silver - mill finish aluminum. Sold Individually. Compatible with 88200 Suspension Tubes, 88202 Track Adapters, and 88204 Ceiling Flanges. Recommended spacing between supports is 3 to 4 feet. These wall brackets are only intended to support the end of the privacy cubicle track and can not be used along the length of the track to attach it to the wall. No additional end stop is required when using the wall bracket, however adding or removing carriers requires the track to be removed from the wall bracket.